Print Page | Close Window

Kicker L7 10" x2 kicker 500w amps?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72588
Printed Date: May 15, 2024 at 10:36 AM


Topic: Kicker L7 10" x2 kicker 500w amps?

Posted By: davidh_r
Subject: Kicker L7 10" x2 kicker 500w amps?
Date Posted: February 10, 2006 at 6:50 PM

Can i run 2 kicker kx500.2 amps to a 02' kicker L7 10" 2ohm dvc? I havent seen a setup with 2 amps on one dvc, so im wondering if there is some reason why i shouldnt do this. I have this equipment already and id REALLY like to try and get this setup to work.



Replies:

Posted By: geepherder
Date Posted: February 10, 2006 at 7:22 PM

Just bridge one of the amps and wire the voice coils in parallel.  If you try to bridge both amps and hook them up, you'll be running them at 2 ohms mono, which is probably too low an impedance for those amps.  Most stereo amps are only stable down to 4 ohms mono.



-------------
My ex once told me I have a perfect face for radio.




Posted By: davidh_r
Date Posted: February 10, 2006 at 9:54 PM
Heres the manual for my amp https://www.kicker.com/06/tech-support/manuals/manuals/02KX300_400_500_800_2AmpManual.pdf it mentions 4 ohm mono and 2 ohm stereo, take a look




Posted By: geepherder
Date Posted: February 10, 2006 at 10:36 PM
That's exactly my point- 4 ohms mono or 2 ohms stereo, not 2 ohms mono.

-------------
My ex once told me I have a perfect face for radio.




Posted By: davidh_r
Date Posted: February 11, 2006 at 9:49 AM
Would it just not work if i wired it that way or would it damage the amp?




Posted By: boardinbum
Date Posted: February 11, 2006 at 1:03 PM
The amp would probably go into protection mode and just not work. Wiring it for 2 ohms mono is wiring each channel for 1 ohm. And I'm pretty sure your amp isn't stable to 1 ohm stereo.




Posted By: geepherder
Date Posted: February 11, 2006 at 7:43 PM
The amp is not designed to run at that load, as you posted it states in the manual.

-------------
My ex once told me I have a perfect face for radio.





Print Page | Close Window