how to run a 200 amp stinger isolator

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72627
Printed Date: May 04, 2024 at 10:50 AM

Topic: how to run a 200 amp stinger isolator

Posted By: prophesybh
Subject: how to run a 200 amp stinger isolator
Date Posted: February 11, 2006 at 4:18 PM

I was woundering if anyone know's how to setup a 200 amp stinger isolator. It has intructions but there pretty vauge, I know the two bit posts are for the batteries, and one of the smaller posts is for a ground, but what do i run on the other smaller post. Thanks in advance for any help.

Replies:

Posted By: geepherder
Date Posted: February 11, 2006 at 7:51 PM

It's just a big relay, so if you ground one of the little posts, you have to feed power to the other one to trigger it. Whenever it recieves 12 volts, it'll activate the coil, and the contacts will close.

-------------
My ex once told me I have a perfect face for radio.

Print Page | Close Window