Eclipse DVC’s
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=72878
Printed Date: May 12, 2024 at 5:03 AM
Topic: Eclipse DVC’s
Posted By: tee17
Subject: Eclipse DVC’s
Date Posted: February 15, 2006 at 1:06 PM
I have a 2000 Dodge Intrepid. I am getting ready to install 4 12" eclipse dvc's in there. I am gonna run a rockford fosgate bd 500.1 to them. Will this be enough power or should i add a second amp? I am getting this from a friend because he totaled his car and he is letting everything go for 300. so i cant pass up on this
Replies:
Posted By: forbidden
Date Posted: February 15, 2006 at 1:39 PM
What model are the subs? Even then, provided you do not clip the amplifier, it will be lots of output for you. Most of those amps were up around the 750w rms @ 2 ohm mark. It is all about the box in this case, not the amp (unless the impedance of the subs are a mismatch to the amp.)
-------------
Top Secret, I can tell you but then my wife will kill me.
Posted By: coppellstereo
Date Posted: February 15, 2006 at 5:13 PM
if it is the aluminum, they are 450w each and titaniums are 750w each.
-------------
|