Print Page | Close Window

Rockford P312D4 wiring

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73011
Printed Date: May 15, 2024 at 10:12 PM


Topic: Rockford P312D4 wiring

Posted By: XxXTransamxxx
Subject: Rockford P312D4 wiring
Date Posted: February 17, 2006 at 12:20 PM

Hey guys,

I have 2 Rockford Fosgate P312D4 subs, and a Rockford Fosgate Power T15002 amplifier, I am wanting to know the woofer wiring setup to drop them to a 2 0hm set up for the right power supply...Thanks for any help




Replies:

Posted By: forbidden
Date Posted: February 17, 2006 at 1:17 PM

You can wire this one of two ways. This is the better of the two ways to wire them. Two ohm stereo is for all intents and purposes the same thing as 4 ohm mono. So you will be using the bridged outputs of the amplifier to run both speakers. Here is the diagram.

Wiring Option #2
posted_image



-------------
Top Secret, I can tell you but then my wife will kill me.



Posted By: tcbturbosux
Date Posted: February 17, 2006 at 3:10 PM
Tis not possible to wire two dual 4's in a two ohm load

-------------
Uncle Gumby



Posted By: XxXTransamxxx
Date Posted: February 17, 2006 at 6:23 PM

Thanks


Print Page | Close Window