type r 12 wiring

i have 2 alpine type r 12s the 4ohm version and a rockford fosgate p8002 amp both 2005 models  i heard that theres a way 2 wire them 2 around 2.7 ohms  if u have a diagram or know anything let me know

2.7 ohms?? Where did you hear that?

you were told wrong.. are they dual voice coil or single voice coil?

nope, your amp is 800 watt rms 2 channel right? if so, wire both subs in parralelle, then connect them together in series, then, bridge them on your amp, that will give you a 4 ohm load bridged on your amp, wich is what i think it can handle right?

-------------

Wiring diagram for two dual 4-ohm subs

^Click that link and wire them like shown in Option #2. Then bridge your amp and run them like that.

If you were to series-parallel 3 of them, not 2, you'd get the 2.67 ohms.

-------------
My ex once told me I have a perfect face for radio.

thanks guys   what do u think about running multiple amps on 4 type r 12s  like going with something else besides the rockford p8002 on two other speakers.  would wiring the type rs on my amp to 1 ohm ruin my amp or subs.  they are dual voice coil to whoever asked. 

what do u think about running multiple amps on 4 type r 12s (4 ohms) like going with the rockford p8002 on the two i have and running two more off another different brand amp?  would wiring the type rs on my amp to 1 ohm ruin my amp or subs.  they are dual voice coil to whoever asked. 

To my knowledge, that amp is not stable to 1 ohm, so yes, you could possibly ruin your amp if you did so.

-------------
My ex once told me I have a perfect face for radio.