Print Page | Close Window

mutang mach360 turn on pop

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73263
Printed Date: May 19, 2024 at 7:15 AM


Topic: mutang mach360 turn on pop

Posted By: carstereoman
Subject: mutang mach360 turn on pop
Date Posted: February 21, 2006 at 4:38 PM

Got a 2000 mustang w/ the mach 360 system. I put in an aftermarket radio and when you first turn on the radio it makes a loud pop through all of the speakers. I put in a new ground and tried a new radio to no avail. It does have an amp and sub hooked up. Could it have something to do with the amp turn-on wire? Anybody got any suggestions? Thanks!



Replies:

Posted By: Hornshockey
Date Posted: February 21, 2006 at 4:41 PM
yep, you need a 1.5K ohm resistor on the turn-on lead. Ford factory lead uses 5V instead of the aftermaket 12V.

-------------
Life moves pretty fast; if you don't stop and look around once in a while; you could miss it.


Print Page | Close Window