Print Page | Close Window

Bridging memphis amp?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73491
Printed Date: May 15, 2025 at 2:40 PM


Topic: Bridging memphis amp?

Posted By: skaar
Subject: Bridging memphis amp?
Date Posted: February 25, 2006 at 5:38 PM

I have 4 15" kicker comps,4 ohm speakers.I also have a older chrome memphis st1000 amps.Would i bridge this amp to drop it to 1 ohm?if so does anyone know which to speaker outputs on the amp, bridge mode is? thanks



Replies:

Posted By: DYohn
Date Posted: February 25, 2006 at 6:31 PM
That amp is mono so there is no such thing as bridging it.  Yes, it is rated as 1-ohm stable.

-------------
Support the12volt.com



Posted By: skaar
Date Posted: February 25, 2006 at 9:20 PM
Theres two channels to hook the speakers to.Does it matter which + or - i hook the subs to?thanks



Posted By: DYohn
Date Posted: February 25, 2006 at 9:48 PM
There are two sets of connectors, but the amp only has one channel of output.  It is a mono amp.  Use either connector set it doesn't matter.

-------------
Support the12volt.com


Print Page | Close Window