2005 Jeep Grand Cherokee radio
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73541
Printed Date: May 09, 2025 at 11:27 PM
Topic: 2005 Jeep Grand Cherokee radio
Posted By: jerae555
Subject: 2005 Jeep Grand Cherokee radio
Date Posted: February 26, 2006 at 1:27 PM
I'm looking to install my alpine CDA-9855 into my 2005 Jeep Grand Cherokee, but the factory radio harness doesnt seem to have a switched wire, or as alpine would call it, an iginition wire? There are two constants in the harness, but the next few slots are empty. I'm considering tapping into the ignition in order to get the switched wire...is there a wire that I am missing in the factory harness? Or another solution to this problem?
-------------
Jerae555 - 2005 Grand Cherokee
Replies:
Posted By: xinstallerx
Date Posted: February 26, 2006 at 3:07 PM
mOst likely this vehicle has whats called a CAN-BUS system and youll need a special harness to integrate this system. There is also a chance youll have to retain the factory head unit somewhere in the vehicle to turn on the factory amps
-------------
Installers will put it anywhere!
|