jackhammer pics
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=73826
Printed Date: July 07, 2025 at 5:13 AM
Topic: jackhammer pics
Posted By: grrcracker
Subject: jackhammer pics
Date Posted: March 02, 2006 at 11:39 PM
Replies:
Posted By: coppellstereo
Date Posted: March 03, 2006 at 9:36 AM
cool pics. do you work there? Any test results?
What amp are they running?
-------------
Posted By: kirktcashalini
Date Posted: March 03, 2006 at 11:14 AM
that looks sick. nice fiberglassin on the doors of that van as well I noticed in a different picture. whats the plan for that vehicle. Also, get up pics (maybe video) and db results when that beast is done.
-------------
99 Blazer LT. Yellow Top. Big 3. Infinity Kappa Speakers All Around. Jensen CD/DVD flip out. 2 Infinity Kappa Perfect 12DVQs powered by a Alpine PDX600.1 (in one custom box, building a FG box)
Posted By: gus1
Date Posted: March 03, 2006 at 11:47 AM
The Free Candy is a very very nice touch.,......
Gus
-------------
Wherever I go, that is where I end up......
Posted By: kirktcashalini
Date Posted: March 03, 2006 at 11:57 AM
Oh yeah, dont forget about that mounting plate you should make for the magnet in the box... doubt you would, just double checking though.
-------------
99 Blazer LT. Yellow Top. Big 3. Infinity Kappa Speakers All Around. Jensen CD/DVD flip out. 2 Infinity Kappa Perfect 12DVQs powered by a Alpine PDX600.1 (in one custom box, building a FG box)
Posted By: Ravendarat
Date Posted: March 03, 2006 at 4:51 PM
Not should make, have to make I think. At approx 350lbs I dont care what kinda screws or bolts you use that sucker could take down that triple face I think
-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
Posted By: haemphyst
Date Posted: March 03, 2006 at 4:54 PM
...and PLEASE, PLEASE, PLEASE! tell me you are going to reinforce those walls! That thing is gonna breathe like... well you get the idea. You MUST brace those walls, at intervals no more than 6 inches apart!
Ported enclosure or not (actually WORSE in a ported enclosure), those walls are going to flex, the box corners will eventually fail, and at a minimum, your tuning will not be exactly where your spec SAYS it will be. You spent an obvious amount of time and money, expended quite a bit of energy for this system... do it right from the start!
-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
Posted By: grrcracker
Date Posted: March 03, 2006 at 6:20 PM
Posted By: tcss
Date Posted: March 03, 2006 at 7:15 PM
What other equipment ( amps, speakers, etc) are you going to use in this install?
-------------
There is no such thing as free installation!
Posted By: grrcracker
Date Posted: March 03, 2006 at 7:37 PM
4 prsd500spl pioneer amps, 4 1500 cca cat (stupid big batteries), 500amp alt.
Posted By: tcss
Date Posted: March 03, 2006 at 8:11 PM
High freq. speakers? HU?
-------------
There is no such thing as free installation!
Posted By: ss-installer
Date Posted: March 03, 2006 at 8:17 PM
monster
-------------
Posted By: grrcracker
Date Posted: March 03, 2006 at 8:49 PM
pioneer p1, ads 650 4 channel, ads 8's(two in each door), set of ads comps in each door
Posted By: coppellstereo
Date Posted: March 03, 2006 at 9:27 PM
any idea what that kinda power can pull? (amperage)
Did you think about the JBL A6000GTI?
What is the power consumption for the jackhammer?
-------------
Posted By: grrcracker
Date Posted: March 03, 2006 at 10:14 PM
customer says that he is will be getting to crowns and 6 more of those batteries. this van is super dead. the customer has had the van since it was new and estimates that he has put 1500 tubes of sealant along with rino linning and 3x foam r40 insilation. hes a nut.
Posted By: stevdart
Date Posted: March 03, 2006 at 10:21 PM
That's crazy. There's some dedication going on there.
-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
Posted By: luckydevil
Date Posted: March 03, 2006 at 10:58 PM
How would you even brace a box that big? Should it be breaced internally and externally?
grrcracker- What magic number are you guys shooting for as far as dB?
Posted By: iraq_bound?
Date Posted: March 03, 2006 at 11:10 PM
 Oh My God!!!! that is some machine------------- "conspiracy in silence speaks louder than words" -John Lennon
|
