4 channel amp for 2 subs
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74157
Printed Date: May 16, 2025 at 1:19 PM
Topic: 4 channel amp for 2 subs
Posted By: smokinsmitty
Subject: 4 channel amp for 2 subs
Date Posted: March 08, 2006 at 6:07 PM
Ok my buddy has a 6004T audiobahn amp, well is it ok to only use 2 subs on it! so only 2 channels. will they get 300rmsx2 or only 150 rmsx4? thanks
-------------
1 15" Memphis Mojo,
Memphis 16-mc1000D amp,
Audiopipe 4gauge mp kit, Pioneer DEH4700MP head unit.
2002 Yamaha 660R Raptor
Yamaha FZR600 crotch rocket
Sea Doo XP800
Sea Doo Spi
Replies:
Posted By: geepherder
Date Posted: March 08, 2006 at 9:04 PM
If you're connecting two subs, as long as you don't go below the recommended ohm levels (2 ohms stereo or 4 ohms bridged, for example), you can bridge two channels of the amp to each sub.
-------------
My ex once told me I have a perfect face for radio.
Posted By: willdkartunes
Date Posted: March 08, 2006 at 9:36 PM
It shouldn't be a problem hooking the 4-channel to those subs. What kind of subwoofers are you hooking it up to?
Posted By: smokinsmitty
Date Posted: March 09, 2006 at 5:22 AM
2 12" memphis m1 dvc. How would i bridge the 2 channels to run 1 sub! explain this to me
-------------
1 15" Memphis Mojo,
Memphis 16-mc1000D amp,
Audiopipe 4gauge mp kit, Pioneer DEH4700MP head unit.
2002 Yamaha 660R Raptor
Yamaha FZR600 crotch rocket
Sea Doo XP800
Sea Doo Spi
Posted By: geepherder
Date Posted: March 09, 2006 at 7:56 PM
Your original post asked about using 2 subs. If you want to use a 4 channel to run a sub, I suggest amping the front speakers, then bridging the rear channels to run the sub. At least until your buddy gets some more gear.
-------------
My ex once told me I have a perfect face for radio.
|