Here's my setup, i need help with setting up my deck to compliment the rest of my system. Setting of the crossovers and frequencies. if anyone that knows these decks can help me out.
Alpine cda 7893
Diamond Audio Hex S600s 6.5 inch components freq response 42-24 K hz
Rockford Fosgate Fanatic X 5.25 inch components 40-20 k hz
Rockford Fosgate 851x 4 channel amp
Rockford Fosgate 1001bd mono amp
2x 12inch Punch HX2 subwoofers 200 – 26 hz 88db sensitivity
I'd probably try contacting alpine directly for a manual. Check their website: www.alpine1.com.
-------------
My ex once told me I have a perfect face for radio.
maybe my post isnt clear, I apolagize, I understand how the deck works and how to change the settings, I don't understand what I should set them at.
Im looking for someone to give me advice on what to set my crossovers and frequencys to compliment the components i have. thanks
yeah its pretty extensive too as anyone else with an alpine knows, i mean i play around with it and try to listen to what sounds best. in the morning i will look and tell you what i have everything set to. the deck also has a time correction feature. which is supposed to correct for where the driver is sitting
The way i set mine is to listen to each set of speakers individually.
Sub(s) I cut mine off at 80Hz with a 18db slope
6.5's listen to them at both a normal level and a loud level. Choose a roll off point where there is no distortion from low and mid-low frequencies
5.25's same as 6.5's
As far as slopes, you have to determine cut-off points first then, choose what slope sounds best to you without distortion.
I have a 9835 so the crossover is probably the same.