2004 yukon with bose

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74322
Printed Date: July 03, 2025 at 3:28 AM

Topic: 2004 yukon with bose

Posted By: soonerfan7
Subject: 2004 yukon with bose
Date Posted: March 11, 2006 at 10:29 PM

I have a 2004 yukon with the stock bose system and I am installing a clarion EQ,800w amp and two 12" subs.I was told by a buddy to connect the output converter to the speaker wires at the reciever to prevent distortion from the factory amp.Is this true or can I tap into the speakers beyond the amp?

Replies:

Posted By: xscash
Date Posted: March 11, 2006 at 10:50 PM

well, the output from the deck is low level....and your using a high to low level converter....so you need to connect at speaker. the bose radio is not a good place to connect.

Posted By: soonerfan7
Date Posted: March 11, 2006 at 10:57 PM

I'v been reading simular post.One said to tap in at the factory sub and another said it didnt matter cause you can filter out at the speaker.Just trying to learn,Thanks for the info

Posted By: snotdobbs
Date Posted: March 11, 2006 at 11:04 PM

Or you could just get the right interface and boom all your connections are made right at the factory head unit without splicing into any wiring it even includes a switched remote lead isolated from the radio so theres no turn on pop!

Check out www.peripheralelectronics.com or you can order one from https://www.the-musicstore.com/ over the phone or through email. Just ask for Joe

Posted By: soonerfan7
Date Posted: March 11, 2006 at 11:34 PM

Thanks for the links,any idea what one will set me back?

Posted By: snotdobbs
Date Posted: March 12, 2006 at 12:02 AM

It retails for 149.99 but I could get you one for 120 plus shipping

Print Page | Close Window