kenwood kac-8102d

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74482
Printed Date: April 27, 2024 at 7:53 AM

Topic: kenwood kac-8102d

Posted By: loonytu
Subject: kenwood kac-8102d
Date Posted: March 14, 2006 at 6:22 PM

can i bridge this amp my manual does not tell me if i can

Replies:

Posted By: geepherder
Date Posted: March 14, 2006 at 7:03 PM

No, there aren't multiple channels to bridge since it's a mono amp (one channel amp). It may seem a little confusing because there's two sets of speaker terminals, but those are just for wiring flexibility.

-------------
My ex once told me I have a perfect face for radio.

Posted By: customnate
Date Posted: March 14, 2006 at 10:35 PM

Its a mono block which is a single channel amp!! Well bro the way to hook it up if ya are running two subs wiht two terminal cups! do this! take the positive and negative from one terminal cup to the other one! so run just ONE set of speaker leads to one terminal cup and jump it!! OTHER QUESTION what subs? and what ohm are they wired at DVC? SVC ? Very important let me know bro

-------------
Sinceryly,
The Custom Nate

Print Page | Close Window