problem with my new amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74552
Printed Date: May 15, 2025 at 9:47 PM

Topic: problem with my new amp

Posted By: dungslung
Subject: problem with my new amp
Date Posted: March 15, 2006 at 10:02 PM

I just bought a rockford fosgate p5002 and took out my old amp and hooked up the new one... im using 4 gauge ground and power wire, the same ones i had hooked up to my old amp but the new amp never turns on... i didn't change a thing with the wires and i checked the fuses and everything, they are all good. i don't know why it won't turn on.

Replies:

Posted By: dungslung
Date Posted: March 15, 2006 at 10:19 PM

would it be because i have the subs wire wrong? how would be the best way to wire the p5002 to my 2 cvr12 12" kickers?

Posted By: kfr01
Date Posted: March 16, 2006 at 12:14 AM

This might be a stupid question, but is your turn-on lead working?

Check your connections again. Make sure something didn't pull loose when you installed the new amplifier.

Do you get -any- activity from the amplifier? A light flicker?

-------------
New Project: 2003 Pathfinder

Posted By: dungslung
Date Posted: March 16, 2006 at 10:12 PM

never mind, all good... was a bad fuse, it isn't blown but it just wouldn't work, i switched that and it's good now.

Print Page | Close Window