Air ride switch positve

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74708
Printed Date: June 01, 2024 at 3:33 PM

Topic: Air ride switch positve

Posted By: stlthf1
Subject: Air ride switch positve
Date Posted: March 18, 2006 at 8:11 PM

Hello,

I am getting ready to install an air ride system in my 98 F150. I've read over the instructions and I have to use a battery constant positive as well as a switched positive.I read over the diagrams and for my truck it says

Switched 12V+ Wire color: BLACK/ Pink

Where do I find that? How should I tap into it? Any suggestions would be great.

Thanks,

Jon

Replies:

Posted By: jeffchilcott
Date Posted: March 18, 2006 at 8:32 PM

in the main ign harness in the steering coloum

-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place

Posted By: stlthf1
Date Posted: March 18, 2006 at 8:39 PM

What is the best way to tap into it?

Posted By: KPierson
Date Posted: March 18, 2006 at 9:12 PM

I would strip a bit of insulation back off of the ignition wire and wrap your air ride wire snugly around it, then hit it with a soldering iron. There is a good soldering 'how to' on this site. To prevent issues down the road I wouldn't recomend cutting the ignition wire to use a butt splice.

-------------
Kevin Pierson

Print Page | Close Window