94 dodge intrepid, amp to factory hu?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74741
Printed Date: July 20, 2025 at 12:48 AM

Topic: 94 dodge intrepid, amp to factory hu?

Posted By: thadon$
Subject: 94 dodge intrepid, amp to factory hu?
Date Posted: March 19, 2006 at 11:13 AM

hi to every one on here. now lets get to business i have a dodge intrepid 94 and i have a factory stereo and i wanted to hook it up to my amp. i already brought the converter and my wires have been ran from the battery to the trunk i just need help hooking the converter up to the factory stereo can someone help?

Replies:

Posted By: thadon$
Date Posted: March 19, 2006 at 11:22 AM

this is what the converter looks like

Posted By: Velocity Motors
Date Posted: March 19, 2006 at 12:18 PM

The WHITE wires and the GRAY wires are your speaker input wires. One for left and one for right. The BROWN wire is a GROUND wire that helps the LOC ground so you don't get as much interference in the lines.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: thadon$
Date Posted: March 19, 2006 at 1:22 PM

where would be the best place to hook the ground to in my car

Posted By: bmwpwner
Date Posted: March 20, 2006 at 11:22 PM

i usually don't use the grounds on the inline converter. i haven't ever run into a situation that needed them. someone told me one time that sometimes in older vehicles it will help keep noise out of the system but i haven't ever had to use the brown wires at all. good luck!

-------------
"I cannot teach anybody anything, I can only make them think."
-Socrates-

Print Page | Close Window