Print Page | Close Window

amp selection

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74774
Printed Date: May 11, 2025 at 6:17 PM


Topic: amp selection

Posted By: bignumber82
Subject: amp selection
Date Posted: March 19, 2006 at 8:27 PM

Hey guys I need some help on selecting the perfect amplifier to complete the system I'm installing in my 2000 single cab Toyota Tacoma PreRunner. I was wondering if it was possible to buy just one powerful amp that will power both my component speakers (https://www.polkaudio.com/caraudio/products/mmc5250/) and my subwoofer (https://www.infinitysystems.com/caraudio/product.aspx?ProdId='KAPPA+PERFECT10DVQ'&Ser=KPE&Cat=SUB), and if so, what would be a good choice for under $400 or so? Having a single cab truck, I only have one pair of components (as opposed to two) so I thought that this might be possible. Thanks for any help.

-------------
chris



Replies:

Posted By: arrow12
Date Posted: March 19, 2006 at 8:45 PM

If you want you could get a four channel amp and run 1 channel to each component and 1 channel to each voice coil on the sub.  You might be able to just bridge 2 channels, but make sure someone other than me says you can.  You could try this JBL.



-------------
That's my opinion. Take it, leave it, or correct me.


Print Page | Close Window