Volume calculation?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74794
Printed Date: May 14, 2025 at 11:18 PM

Topic: Volume calculation?

Posted By: allmet33
Subject: Volume calculation?
Date Posted: March 20, 2006 at 10:56 AM

What's the best way to determine the volume of an enclosure IF, the enclosure isn't a definite shape such as a square, rectangle or circle. The enclosure I'm planning will have a shape that follows the contours of the side wall of the trunk on one side and the other side will have a curve along it to accomodate the spare tire. The only definite number will be the height of the whole thing. Any suggestions???

Replies:

Posted By: the12volt
Date Posted: March 20, 2006 at 11:00 AM

Hi allmet33, this has been covered numerous times in our forums and there is a sticky about this topic here: https://www.the12volt.com/installbay/forum_posts.asp?tid=41102&PN=1

-------------
posted_image

the12volt • Support the12volt.com

Posted By: allmet33
Date Posted: March 20, 2006 at 11:22 AM

Thanks for the heads up, much appreciated!

Print Page | Close Window