Rockford RFX 9300

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74900
Printed Date: July 30, 2025 at 10:27 PM

Topic: Rockford RFX 9300

Posted By: feenal
Subject: Rockford RFX 9300
Date Posted: March 22, 2006 at 9:54 AM

Hey guys, I need to know what pins are for what wires for this deck for the power/speaker harness. I bought the deck used and the connector for the back of the deck has no wires in it and the label on the top of the deck is too faded to make out, I have terminals and wires to stick in the connector but I need to know which terminals are which, if anyone can help me out I would greatly appreciate it.

Thanks.

Replies:

Posted By: feenal
Date Posted: March 22, 2006 at 8:50 PM

com'on guuuys, someone out there must have this deck, just pop it out and have a look at the connector for me plzzzzz posted_image

Posted By: geepherder
Date Posted: March 23, 2006 at 11:13 AM

Circuit City probably has the harness you need in stock.

-------------
My ex once told me I have a perfect face for radio.

Posted By: feenal
Date Posted: March 23, 2006 at 11:36 AM

I don't need the harness, I have an empty connector I just need to know the locatation of each wire in the connector...I have wires with terminals that will fit into the connector

Posted By: kgerry
Date Posted: March 23, 2006 at 12:22 PM

so you want someone to uninstall their stereo to tell you what wire goes where because you dont "want" to buy the proper harness for 10 bucks?? wow

why not drop by a Visions and see if they have a harness in a new unit you can look at??

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: feenal
Date Posted: March 23, 2006 at 4:34 PM

never mind, I e-mailed rockford fosgate directly and they sent me the pin location...thanks for all the help posted_image

and by the way I have the proper harness...now, and I didn't have to buy anything posted_image

Print Page | Close Window