5 channel amp and LOC
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=74999
Printed Date: August 19, 2025 at 2:33 PM
Topic: 5 channel amp and LOC
Posted By: charlie101_1999
Subject: 5 channel amp and LOC
Date Posted: March 23, 2006 at 8:45 PM
Is it possible to use an LOC for a 5 channel? I have a aftermarket HU but kinda like the features of the factory one. Thanks
Replies:
Posted By: stevdart
Date Posted: March 23, 2006 at 9:17 PM
Use two LOCs. A four channel and a two channel. Same way you would do if you were using a four channel amp and a separate mono amp. A lot of amps, though, have a full range pass through line level output. A four channel would give you a choice of whether to use the inputs to the front or the rear to pass through. If yours has this feature, you can forego the second LOC and use the line out from the front inputs to feed the sub input.
-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
Posted By: forbidden
Date Posted: March 23, 2006 at 9:55 PM
Even better is to skip the LOC and use a far superior interface like the Audio Control LC6 or 6XS.
-------------
Top Secret, I can tell you but then my wife will kill me.
|