Amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7509
Printed Date: May 16, 2025 at 4:13 AM

Topic: Amp

Posted By: MuGeN
Subject: Amp
Date Posted: January 01, 2003 at 8:59 PM

Hello guys,

I am new to car stereo installation. I just installed my deck and was wondering what the 2 rca plug things are at the back? I am guessing they are for the amp but i am not sure.

Installation on my car was a real pain, and i should maybe set up the amp wires before i put everything back on.

Thanks

Replies:

Posted By: brianh
Date Posted: January 01, 2003 at 9:04 PM

They are outputs for you amplifiers. Front and rear. Brian

Posted By: MuGeN
Date Posted: January 01, 2003 at 9:25 PM

thanks for your reply

Would i only have to use one to power one amp or would i need both

Posted By: MuGeN
Date Posted: January 01, 2003 at 10:33 PM

and would i need any other wires for the amp coming out of the cd deck? Such as power, etc..

Thanks

Posted By: SOUND PRESSURE
Date Posted: January 02, 2003 at 12:14 AM

You will need your remote turn on lead from your radio to turn on and off the amp.

-------------
Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!

Posted By: mustangadam
Date Posted: January 02, 2003 at 11:19 PM

in response to connecting your RCA cables you need to consider what kind of amp or amps you will be using. I would go with a 4-channel...it's really eay to set up. If you wanted to get fancy with it, and you know what you're doing, you could try a signal processor with a 4-channel or two 2-channels, but for simplicity's sake, go for the 4-channel.

Exactly what speakers do you have, and what head unit are we talking about here?

-------------
Adam Donald Flournoy

Boeing Commercial Airplanes
7E7 "Dreamliner" Project