avh-p5700dvd, 2006 silverado
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75229
Printed Date: July 18, 2025 at 6:57 AM
Topic: avh-p5700dvd, 2006 silverado
Posted By: nxtgenaud
Subject: avh-p5700dvd, 2006 silverado
Date Posted: March 28, 2006 at 3:06 AM
im am putting a avh-p5700dvd in a 2006 silverado when i wire the wiring harness do i need to give it a seperate switched 12 volt or can i use the on that is in the harness? i am using the harness that does away with the door chimes if that helps. thanks in advance
Replies:
Posted By: doibuy
Date Posted: March 28, 2006 at 9:23 AM
you need to run an accessory wire, there isn't one in the harness.
Posted By: Velocity Motors
Date Posted: March 28, 2006 at 9:32 AM
The module that your using should have an output for the IGN wire, but if it doesn't you will need to run a new IGN wire from the fuse box or go directly to the PINK wire at the ignition harness.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: forbidden
Date Posted: March 28, 2006 at 1:41 PM
Or if you want the unit to operate without the ignition circuits fully engaged, as in ACC position on the ignition tumbler, go to the ACC wire. It will be the orange wire in the same main ignition harness.
-------------
Top Secret, I can tell you but then my wife will kill me.
|