3 12" set-up300-450w/rms

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75290
Printed Date: April 29, 2024 at 11:54 PM

Topic: 3 12" set-up300-450w/rms

Posted By: iraq_bound?
Subject: 3 12" set-up300-450w/rms
Date Posted: March 29, 2006 at 12:39 AM

:)My amp pulls 1200W RMS MONO @ 1.3 ohm. https://www.pyleaudio.com what would be a good subwoofer inside a sealed box?

-------------
"conspiracy in silence speaks louder than words" -John Lennon

Replies:

Posted By: iraq_bound?
Date Posted: April 12, 2006 at 6:03 PM

got what i need???? thx LOL>>>>>>> posted_image

-------------
"conspiracy in silence speaks louder than words" -John Lennon

Posted By: luckydevil
Date Posted: April 12, 2006 at 9:53 PM

The amp is Pyle? I'd be surprised if it is putting out 1/4 of that 1200watts. Not only that, it probably isn't going to last very long running at 1ohm.

You can get an MBQuart RAA1000 which puts out 1k watts at 1ohm for under $300 shipped.

Posted By: Aruman
Date Posted: April 13, 2006 at 7:06 AM

yes, i doubt that amp is putting it's rated rms power.

-------------
Shaking The Neighborhood

Posted By: darthness
Date Posted: April 13, 2006 at 12:01 PM

thats not RMS... thats peak. you can get a hifonics that'll actually do that for under $200 on ebay, bnib.

Print Page | Close Window