Print Page | Close Window

Amp output./Sound Quality

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75384
Printed Date: May 16, 2024 at 11:39 AM


Topic: Amp output./Sound Quality

Posted By: astrocreep
Subject: Amp output./Sound Quality
Date Posted: March 30, 2006 at 11:47 AM

I'm new to this forum and looking for some advice. 

I have an Alpine HU with 4v preouts running an Alpine F240 (40w RMS x 4) pushing Alpine components and coaxles.  I have 4 ga power wire runnning from the batt to a distro, and then 8 ga running to the Alpine (I plan on adding a sub/amp later).  For the ground, I have 8 ga grounded to the floor (scraped metal) using a self tapping screw, about 18 inches from the amp.  I do not have any noise, that I can hear, and the sound is pretty clear.  The problem is the volume.  Even with the amp gains turned up about 1/4 to 1/2 way, I have to crank the volume of the HU to about 25 to get decent loudness....I just don't think the amp is putting out what it should.

Any suggestions or ideas would be greatly appreciated.




Replies:

Posted By: geepherder
Date Posted: March 30, 2006 at 12:02 PM
Do a search in here on how to set your gain, and you should find what you need.

-------------
My ex once told me I have a perfect face for radio.


Print Page | Close Window