2003 Nissan Frontier Speaker help

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7548
Printed Date: May 11, 2025 at 6:21 PM

Topic: 2003 Nissan Frontier Speaker help

Posted By: Thinkster
Subject: 2003 Nissan Frontier Speaker help
Date Posted: January 02, 2003 at 2:57 PM

I want to change the original factory speakers which are 2 Ohm 15 Watt, 6 3/4" speakers that have an integrated spacer/molding and use some Pioneer 3-way 6 1/2" but the problem is that if I mount the pioneer speakers, there is no longer clearance for the window to roll all the way down and if I use washers to space it enough, there's too much gap and the speakers sound like crap compared to the original factory speakers. Is there some sort of adaptor plate or spacer or other solution I can use?

Replies:

Posted By: brianh
Date Posted: January 02, 2003 at 4:19 PM

How much clearance do you need? If you do not need more than a 1/2 inch or so, get some MDF board and cut trim rings to stand your speaker away from the door. Brian

Posted By: Thinkster
Date Posted: January 03, 2003 at 3:04 AM

I would say I need about 1/2 inch or so. I would prefer to do it with something pre-fabbed if there is such a thing.

Print Page | Close Window