Hifonics Amplifier Protection Mode
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75590
Printed Date: July 21, 2025 at 3:11 PM
Topic: Hifonics Amplifier Protection Mode
Posted By: thebled88
Subject: Hifonics Amplifier Protection Mode
Date Posted: April 02, 2006 at 11:20 PM
-Alpine 2897 HU
-2 Infinity Kap 6.5
^Pioneer 200.2
-2 Premier 10"
^Hifonics 3000.1
-LA 1 farad
My problem is that when i turn my volume around 16+,(normally listen at 26) my sub amp will enter protection mode. Only the sub amplifier. I have 2 seperate power wires going to each amp from the battery. I share the remote turn-on wire. Seperate interconnects. Capacitor is used only by sub amp. Im thinking that somewhere between the capacitor and amp is the problem.
im going to pull the cap and run straight battery power to the amp tommorw and see how it runs
Anyone else ever had a protection mode on a hifonics or experienced anything similar????
Replies:
Posted By: jeffchilcott
Date Posted: April 03, 2006 at 12:05 AM
what impedance are your subs? what load is that amp stable to?
-------------
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
|