Stinger battery
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=75776
Printed Date: May 01, 2024 at 1:40 PM
Topic: Stinger battery
Posted By: markcars
Subject: Stinger battery
Date Posted: April 06, 2006 at 11:13 AM
I purchased a Stinger SP800 battery (with Pac200 isolator etc etc) and have come across a hurdle. The battery came with battery posts (round nuts) that have threads in them on the top. The pack came with 2 springs as well. First I went to home depot to get a bolt that would fit the thread in this post. Upon failure, I ordered a "battery post". A bolt looking device. Now I see that this bolt's thread is too small for the post but fits perfectly in the spring that came with the battery. I am not sure if this spring is to be fit in the post and if yes, how does one do it? Do I need a tool? Do I press the spring into the threads? It does not seem to screw-in.
If the spring is not to be used, I am not able to find a place online that specifies the size of the thread for the nuts that come with the Stinger SP800. Even stinger's site does not specify.
Any help is appreciated.
Replies:
Posted By: hardknocks
Date Posted: April 09, 2006 at 1:17 AM
take the post into advance auto, autozone, napa, carquest, or O'reily they can help you find the right bolt to fit the post.
-------------
4-15" RF T2
6-7" RF Component sets
8 Planet Audio 900d
10 Batcap800
1 250 amp alt
1 300 amp alt
2" sound deadner roof,doors,floors
|