wiring up a 4ohm dvc

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7585
Printed Date: May 11, 2025 at 1:27 AM

Topic: wiring up a 4ohm dvc

Posted By: isysopi
Subject: wiring up a 4ohm dvc
Date Posted: January 03, 2003 at 9:11 AM

What would be the best way to wire up a bridged Sony XM-2150gsx to a memphis studio 12" 4ohm dvc. The sony isnt stable at 2 ohm mono so is it possible to wire up a 4ohm dvc to a mono amp and still get an impedence of 4ohms?

Replies:

Posted By: brianh
Date Posted: January 03, 2003 at 10:07 AM

I belive if you wire the voice coils in series with each other and bridge the amp you should have a 4 ohm load.(I think) Brian

Print Page | Close Window