jeep amp bypass
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76186
Printed Date: May 10, 2025 at 4:26 AM
Topic: jeep amp bypass
Posted By: mcgee
Subject: jeep amp bypass
Date Posted: April 13, 2006 at 4:38 PM
i have a 1995 jeep grandcherokee with a infinity gold system and i put a kenwood deck in now i have to bypass the factory amp does anyone know how to do this or have a diagram? please help?
Replies:
Posted By: geepherder
Date Posted: April 13, 2006 at 5:11 PM
What is your reasoning to bypass the factory amp- I've never had to do that in one of those. I'm assuming you don't have any audio now- did you connect the factory amp turn on lead in the harness (it may be labelled power antenna instead)? If so, make sure the wire you used in the Kenwood harness shows 12 volts whenever the deck is on. Some of the lower model Kenwoods only supply power to the blue wire (normally power antenna), and not the blue/white.
-------------
My ex once told me I have a perfect face for radio.
|