2003 Jeep Wrangler

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76354
Printed Date: April 25, 2024 at 10:44 AM

Topic: 2003 Jeep Wrangler

Posted By: draasch
Subject: 2003 Jeep Wrangler
Date Posted: April 17, 2006 at 8:28 AM

I have a customer that has a Jeep Wrangler. He wants to add a small amp to the factory radio. I don't do a lot of radio/amp hook ups. There are no RCA outputs on his radio. Can someone shed some light on how to wire up the amp to the factory radio and any parts that might come in handy for the hook up?

Thanks,
David

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Replies:

Posted By: arrow12
Date Posted: April 17, 2006 at 9:42 AM

You need a line output converter. Something like THIS ONE. I don't know if that is the best one to use, but I was just giving you an idea.

-------------
That's my opinion. Take it, leave it, or correct me.

Posted By: xtremej
Date Posted: April 17, 2006 at 10:01 AM

You can also look for an amp with high level inputs. Basically t of of the rear speaker wires (sound bar?) and some amps will even turn on when voltage is detected at these wires so you don't need a remote turn on wire. I generally use the line out converters myself just wanted to give you another option.

-------------

Posted By: draasch
Date Posted: April 17, 2006 at 10:19 AM

he has the amp already. yes, he has the rear sound bar. i dont think the amp has the inputs you are talking about.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Print Page | Close Window