Alpine System

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76419
Printed Date: June 07, 2025 at 6:40 PM

Topic: Alpine System

Posted By: djlayz
Subject: Alpine System
Date Posted: April 18, 2006 at 10:16 AM

Hi the other day i blew one of my swr-1041 so i went out and bought 2 swr-1042. they are each hooked up to there own mrd-501d amps. i also have type r components in the front and the back with a 4 channel amp. now what i would like to know is how should i set my i-personlize, my sub settings on the deck (volume & phase) and also all the settings on the amps?

Replies:

Posted By: willdkartunes
Date Posted: April 18, 2006 at 5:11 PM

The deck settings are for your preference. Toy around with it for a while and see which settings you like best. As for the amplifier, make sure your gain setting is correct. The rest is your preference as well.

-------------
Do whatever makes you happy in life without diminishing the happiness of others

Posted By: djlayz
Date Posted: April 19, 2006 at 10:47 PM

Thank you. I got another question, i obvisouly have my subs in the trunk part of my van. the problem is there is a bout an inch from the box to the door and it sounds awful. which way do you guys think i should face my subs. leave it the way it is, have them facing up or have them facing the box. or any other suggestions please.

Print Page | Close Window