Kenwood KGC-9044 Equalizer
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76535
Printed Date: May 17, 2025 at 12:56 AM
Topic: Kenwood KGC-9044 Equalizer
Posted By: aez987
Subject: Kenwood KGC-9044 Equalizer
Date Posted: April 20, 2006 at 7:52 PM
I have a Kenwood Excelon X559 head unit and a Kenwood KGC-9044 Equalizer. They both have the same connections on the back (Left, Right, NonFading, and Aux In).
The equalizer's owner's manual says to connect the head unit's output to the equalizer's IN connection. Then run the equalizer's Left, Right, and NF connections to the appropriate amp. That makes perfect since, and that worked for me in the 'old days' before the head units came with so many extras.
Anyone hookup a similar setup? Any help is greatly appreciated.
Replies:
Posted By: tcss
Date Posted: April 22, 2006 at 12:11 PM
I don't understand what you are asking? Take either front or rear full range outputs from the deck and hook them up to the inputs on the EQ. Then hook the outputs from the EQ to the appropiate amps.
-------------
There is no such thing as free installation!
|