Hole to AMP12V+ from Inside to Bat on Altima?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7655
Printed Date: May 10, 2025 at 2:42 PM

Topic: Hole to AMP12V+ from Inside to Bat on Altima?

Posted By: TacomaXray
Subject: Hole to AMP12V+ from Inside to Bat on Altima?
Date Posted: January 04, 2003 at 6:08 PM

I have a Nissan Altima 97 ... I have everything hooked up ... but I cant find a hole on the chassy so I can make the wire go from the inside of the vehicle to the battery ....

I was hoping there was a Hole near the Clutch Pedal like in MY older car but no.

-------------
Tacoma _Lucas_ Gangster

Replies:

Posted By: Velocity Motors
Date Posted: January 04, 2003 at 6:19 PM

What gauage wire are you using ? If it's only 8 gauage you can cut into the wiring boot of the main harness and slip it through there.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: TacomaXray
Date Posted: January 04, 2003 at 6:21 PM

Thank you Jeff... now... do you know where I can find the " wiring boot of the main harness "??? in the Fuse Box?

-------------
Tacoma _Lucas_ Gangster

Posted By: Velocity Motors
Date Posted: January 04, 2003 at 6:31 PM

Look under the dash by the gas pedal/brake area aginst the firewall. Look for the rubber boot that you can slit into and pass the wire through this boot. Doesn't matter if it's the main one or not, just find one and pass the wire through it.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window