Print Page | Close Window

amp wired

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76779
Printed Date: May 10, 2025 at 1:57 AM


Topic: amp wired

Posted By: instalador
Subject: amp wired
Date Posted: April 25, 2006 at 12:32 PM

hello guys. i will like to get all sugestion..im  / installing a amp( a 4chanel amp.

model brand( audiofonics digital max adf.242- 1100 wx .im installing on small toyota truck 96 tacoma .   i will use 2 chanel ( 1-2) for a componente  alpine in front doors .the speaker is a250 w.   .the other 2 chanel i will use for the  single woofer .selead box (kicker cvr 4 ohms.dvc.,what type of wire configuracion will be the best (paralel or  series) on speaker woofer 10 inch.dvc 4 omhs? 

note;amp features,2omhs stereo/4omh mono  ----2-ohm stable(4ohm bridged------ odb-18bass boss with varble sub(45hz:errr:



-------------
electriope88



Replies:

Posted By: geepherder
Date Posted: April 25, 2006 at 7:58 PM
I'd bridge the amp and wire the voice coils in series.  This is electrically the same as one voice coil per channel.

-------------
My ex once told me I have a perfect face for radio.



Posted By: instalador
Date Posted: April 27, 2006 at 1:19 PM

thank you so much!!           geepherder.....

it help  a  lot .  series ( sounds  good)



-------------
electriope88


Print Page | Close Window