how can i get sound from my new head unit

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=76830
Printed Date: May 15, 2024 at 4:43 AM

Topic: how can i get sound from my new head unit

Posted By: rdwilkes
Subject: how can i get sound from my new head unit
Date Posted: April 26, 2006 at 1:11 PM

i have a town & country 03, i want to replace the factory radio with an aftermarket sony head unit, i have a autoleads harness adaptor, when its all connected the neew unit powers up, but no sound, it does not have infinity, what can i do?

-------------
RDWILKES

Replies:

Posted By: xtremej
Date Posted: April 26, 2006 at 1:23 PM

Did your factory stero have sound? Usually you have to turn the amp on chryslers. hook up the blue/white wire to blue lead in harness. With more info it can be narrowed down a little more though.

-------------

Posted By: geepherder
Date Posted: April 26, 2006 at 6:54 PM

Exactly, also connect the amp ground in the harness if you have one.

-------------
My ex once told me I have a perfect face for radio.

Posted By: rdwilkes
Date Posted: April 28, 2006 at 4:26 AM

yes my factory unit worked fine i'm just upgrading to DAAB & MP3, i shall try your suggestion thanks

-------------
RDWILKES

Print Page | Close Window