Print Page | Close Window

Connecting two dual 2 ohms to mono amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77090
Printed Date: July 05, 2025 at 11:00 AM


Topic: Connecting two dual 2 ohms to mono amp

Posted By: bigwest4085
Subject: Connecting two dual 2 ohms to mono amp
Date Posted: May 01, 2006 at 6:00 AM

HI i have (2) dual 2 ohms subwoofers and a mono amp. I am trying to install it myself and im not sure on how to connect both subwoofers to this amp. PLease let me know.. There are 4 wires total coming out of the box but only 2 of them can go in the amp..should i just connect both + and put them in the + in the amp and the same with the -   ????

subwoofer: (2) https://www.cardomain.com/item/POWMOFO12

AMp: https://www.cardomain.com/item/POWA2400DB



Replies:

Posted By: boardinbum
Date Posted: May 01, 2006 at 6:49 AM
posted_image
That would be your best choice.



Posted By: stevdart
Date Posted: May 01, 2006 at 8:56 AM
Open the box by taking out a woofer to make sure the wiring is according to the above diagram.  Best bet is to rewire it yourself so that you end up with only one set of wires to hook up to the amp. 

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.




Print Page | Close Window