Speaker Selection Switch for a truck

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77122
Printed Date: May 23, 2024 at 5:46 AM

Topic: Speaker Selection Switch for a truck

Posted By: neevnav
Subject: Speaker Selection Switch for a truck
Date Posted: May 01, 2006 at 5:21 PM

Hey all,

I have a 94 Chev pickup with a Sony deck installed. What I want to do is install a set of outdoor speakers in the bed of the truck for when I'm at the Drive In/field parties. Now my problem is finding a switch that supports two channels. I have a switch that will support one channel, is there anyway to attach both channels to it? Has anyone else tried something like this or can think of some kind of switch that could facilitate this?

Thanks, Mike

Replies:

Posted By: aznboi3644
Date Posted: May 01, 2006 at 5:23 PM

Just use two switches for each channel if you cannot find a dual switch. It won't hurt anything

Posted By: aznboi3644
Date Posted: May 01, 2006 at 5:26 PM

Easier solution is to get a full rang stereo amplifier for the "outside" speakers.

Using a switch you will have to have switches for the inside and outside speakers.

With the amp you just hook the outdoors to the amp and your off.

Posted By: hustlin247
Date Posted: May 01, 2006 at 7:44 PM

How about 1 switch and some relays?

Posted By: aznboi3644
Date Posted: May 01, 2006 at 8:47 PM

Possibly lol

Posted By: neevnav
Date Posted: May 01, 2006 at 9:26 PM

Any idea how I could go about it with relays? I have no experience using them

Print Page | Close Window