apline cda-9853 problems

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77142
Printed Date: May 09, 2025 at 11:22 PM

Topic: apline cda-9853 problems

Posted By: enihcamxes4you
Subject: apline cda-9853 problems
Date Posted: May 01, 2006 at 11:13 PM

my buddy just got this stereo in his ride and it sounds like poop. i have been thru the manual several times and still cannot figure out how to adjust the low-mid-high frequency settings. i know i can access that information by holding in the menu buttom for a couple sec and it comes up.. and i can adjust the low. but i dont know how to switch it to mid or high to tune it properly. the stereo sounds like crap and he got aalpine type r 6x9 and 5 1'4" any help would be greatly appreciated.

-------------
Lenny Jenkins
MECP First Class Installer
6 years

Replies:

Posted By: luckydevil
Date Posted: May 02, 2006 at 12:08 AM

Some of the reviews on the crutchfield site mention going to alpine's i-personalize site and making custom crossover/eq settings there. Then burn them to cd and load it into the headunit.

Posted By: tcss
Date Posted: May 02, 2006 at 12:56 PM

After you acess the EQ you should be able to change frequencies with the "band" button. I would suggest going on Alpine's web site and download the manual.

-------------
There is no such thing as free installation!