alpine type r wiring?

i currently own a jbl gto1201.1 which is 1100 watts rms at 2 ohm i was wondering if i got dual 2ohm alpine type r's how would i wire them to get a 2 ohm load and is this a good match?

-------------

How many Type R's?
If it's only two subs, wire them like this:

thanks that helps alot it will be 2 subs i forgot to say that. you guys think those subs are a good match for the amp there rated at 500rms each and 1500 max?

Sure they are a good sub. The question is what are you doing about the box. Good sound is all about the box. Read the stickies about boxes and box design for more info.

-------------
Top Secret, I can tell you but then my wife will kill me.

You should be fine, but set your gains correctly.  Do a search in this forum for "gain" if you don't know how.

-------------
That's my opinion. Take it, leave it, or correct me.

i have a slot ported box that is 1.75 cubic feet per chamber i built it myself to specs for some infinity's but when i was looking at the alpine i noticed they need 1.75 cubic feet for a ported encloser as well

Then all you might need to do is change the porting on it.

-------------
Top Secret, I can tell you but then my wife will kill me.

Do you know what the box is tuned to or how long the ports are?