15’’ type r sub, 2004 tacoma

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77462
Printed Date: May 20, 2024 at 12:23 AM

Topic: 15’’ type r sub, 2004 tacoma

Posted By: bigbassboi
Subject: 15’’ type r sub, 2004 tacoma
Date Posted: May 08, 2006 at 7:59 PM

recently bought a type r 15 inch sub... looking to install it in a 2004 toyota tacoma... curently i have it in a 2.25 cuft sealed box but want to go vented. i do not know how to figure it out and are round vents better than slot ports...

workable dimensions 46 " wide, 20 " height and 12 " in depth... can someone with some experience please help me out.. i want it tuned between 30 - 35 hz,,,,,,

thanks in advance.....

Replies:

Posted By: Aruman
Date Posted: May 08, 2006 at 10:44 PM

check this site, you can enter the dimensions, desired tuning frequency and your woofer parameters it may help you out to build your own vented enclosure, just fill your numbers and hit the Calculate Panel Dimensions button, and it will draw the box for you with the rest of the dimensions making it easier for you, hope it help you a bit.

-------------
Shaking The Neighborhood

Posted By: integratyper934
Date Posted: May 09, 2006 at 1:04 AM

in my opinion slot or round ports are the same i personaly think slots look better but if you build them the same cubic inches there the same size technicaly. also round pvc ports to me sound like they get alot of port noise compared to slot ports

Posted By: bigbassboi
Date Posted: May 09, 2006 at 8:23 AM

thanks for some of da info guys, greatly appreciated....

Print Page | Close Window