Eclipse 88120 dvc specs

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77693
Printed Date: May 15, 2024 at 2:35 PM

Topic: Eclipse 88120 dvc specs

Posted By: bdl666
Subject: Eclipse 88120 dvc specs
Date Posted: May 12, 2006 at 5:03 PM

I have one of these brand new in the box, but the instructions manual is missing. I tried Eclipse's web site but they don't have anything older than 2004 there.

Replies:

Posted By: forbidden
Date Posted: May 12, 2006 at 6:16 PM

You want a 1.25 cu.ft.net sealed box for this sub. Build the boix closer to 1.4 cu.ft for gross internal volume. Double up the baffle board and do not use drywal screws to mount this sub as they will either break or rip out of the baffle (thus the double baffle). It will handle 500w rms. Coils are both 4 ohm.

-------------
Top Secret, I can tell you but then my wife will kill me.

Posted By: bdl666
Date Posted: May 12, 2006 at 7:56 PM

Thanks man!

Do you by any chance have the spec's sheet for this woofer. I'll like to model it on WinIsd.

Posted By: forbidden
Date Posted: May 13, 2006 at 2:45 AM

Not that I saw today when I had a quick look. From what I remember Eclipse did not give out all the needed specs on their sheet anyways. I can tell you though that after building over 50 of these boxes for that particular sub, it wails in it and sounds mighty fine Mr. Wolf.

-------------
Top Secret, I can tell you but then my wife will kill me.

Print Page | Close Window