stock wire sufficient for 55 rms?

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78248
Printed Date: May 16, 2025 at 4:46 AM

Topic: stock wire sufficient for 55 rms?

Posted By: spilot
Subject: stock wire sufficient for 55 rms?
Date Posted: May 24, 2006 at 1:55 PM

would my stock wire be sufficient for 55rms per speaker? thank you.

Replies:

Posted By: boug0752
Date Posted: May 24, 2006 at 1:58 PM

Depending on the vehicle it most likely would be sufficient. I would suggest that you redo the wiring though if it were my vehicle.

-------------
If your counting pennies and dimes then maybe you shouldn't be spending every penny and dime you have!!

Posted By: DYohn
Date Posted: May 24, 2006 at 2:05 PM

Didn't you already ask this question? Yes, there is no problem using factory wiring as long as it is intact.

-------------
Support the12volt.com

Posted By: spilot
Date Posted: May 24, 2006 at 3:41 PM

thank you.

DYohn] wrote:

Didn't you already ask this question? Yes, there is no problem using factory wiring as long as it is intact.

yes, but my post got deleted, without an answer.

Posted By: stevdart
Date Posted: May 24, 2006 at 9:17 PM

Looks like it's answered to me!

(Good memory, DYohn. I remembered that one, too.)

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Posted By: spilot
Date Posted: May 25, 2006 at 12:15 AM

i have a very bad memory, i admit...i've installed everything from scratch myself and year and a half ago in my other car...and have forgotten most of it...good thing i quit smoking a few months ago...sorry for a repost.

Print Page | Close Window