best amplifier for components

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78622
Printed Date: May 16, 2024 at 6:36 PM

Topic: best amplifier for components

Posted By: derrickg
Subject: best amplifier for components
Date Posted: June 02, 2006 at 2:14 PM

i have phoenix gold xenon 5.0 component set and i have a choice of 2 amplifiers to power them. which one would give me the most power and best sound quality. 1st amplifier is a autotek 800xi 150 watts at 4 ohms 2nd amplifier is a rockford fosgate 500.2 the black amplifier it is rated at 125x2 at 4 ohms the components are rated at 150 watts rms each.and these components are in qforms kickpanels in a 87 buick grandnational.

Replies:

Posted By: dwarren
Date Posted: June 02, 2006 at 2:24 PM

I bet you wouldn't be able to tell the difference between the two, given they produced the same power output, so either will do as 25 watts is fairly insignificant.

-------------

Posted By: haemphyst
Date Posted: June 03, 2006 at 12:48 AM

Look into a better quality amp for your highs... RFis NOT good on highs, very shrill and raspy sounding, and the Autotek is only marginally better from my recollection...

Eclipse, Zapco, Nakamichi... ANY of those would be better choices for highs...

-------------
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

Posted By: luckydevil
Date Posted: June 03, 2006 at 1:44 AM

Zed Audio makes some pretty good SQ amps for a budget. He also makes the Nakamichi amps and made the old school Hifonics amps.

Stephen Mantz is DA MAN when it comes to amps.

LINK

Print Page | Close Window