1991 MR2 factory stereo wiring?
Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78798
Printed Date: April 27, 2024 at 2:45 AM
Topic: 1991 MR2 factory stereo wiring?
Posted By: superillegent
Subject: 1991 MR2 factory stereo wiring?
Date Posted: June 06, 2006 at 12:59 PM
Anyone know what factory wires go with the wires that are on the deck? My factory harness is cut. My car is a 1991 toyota mr2 turbo. Please help me. THanks
Mike
Replies:
Posted By: tcss
Date Posted: June 06, 2006 at 1:05 PM
Go to general info on the left side of this page, click on vehicle wiring. It's in there.
-------------
There is no such thing as free installation!
Posted By: the12volt
Date Posted: June 06, 2006 at 1:08 PM
Posted By: superillegent
Date Posted: June 06, 2006 at 2:03 PM
Thanks. I need to know what wires go to the deck harness though?
Posted By: forbidden
Date Posted: June 06, 2006 at 2:04 PM
The turbo had a factory amplified system in it. You have IIRC correctly, 4 amplifiers, all found behind the seats, two for the small 4" subs and another pair in the rear quarter panels. It's going to be some fun for you to figure out, ensure that you have a amp turn on wire hooked up as well. Somewhere I have the entire electrical service manual for that car as I used to own a 93 turbo.
-------------
Top Secret, I can tell you but then my wife will kill me.
Posted By: superillegent
Date Posted: June 06, 2006 at 2:07 PM
oh please don't tell me its that hard.
Posted By: sab0276
Date Posted: June 07, 2006 at 9:37 AM
Try this forum
https://www.mr2oc.com/forumdisplay.php?f=14
-Scott
-------------
2002 GMC Yukon SLT non-Bose
Pioneer AVIC N3
|
the12volt •