surface prep for dynamat

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78928
Printed Date: May 14, 2025 at 5:41 AM

Topic: surface prep for dynamat

Posted By: church_of_bass
Subject: surface prep for dynamat
Date Posted: June 09, 2006 at 12:22 PM

what is the best product to use for cleaning the surfaces of your vehicle prior to applying dynamat?

is it ok to apply it without a roller and heatgun?

thanks

-------------
"alcohol and night swimming - It's a winning combination!" - Lenny

Replies:

Posted By: DYohn
Date Posted: June 09, 2006 at 1:00 PM

I use denatured alcohol and lint-free wiping cloths. You'll need some kind of roller to assure good adhesion to irregular surfaces.

-------------
Support the12volt.com

Posted By: xtremej
Date Posted: June 09, 2006 at 1:40 PM

get a roller it will apply a lot easier. If you don't have a heat gun try a hair dryer. Alcohol works for cleaning or glass cleaner that contains ammonia (windex, zep 40).

-------------

Posted By: church_of_bass
Date Posted: June 10, 2006 at 12:34 AM

awesome...thanks for the help guys

-------------
"alcohol and night swimming - It's a winning combination!" - Lenny

Print Page | Close Window