fitting components in f-150 doors

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=78999
Printed Date: May 13, 2025 at 12:34 PM

Topic: fitting components in f-150 doors

Posted By: stormraider04
Subject: fitting components in f-150 doors
Date Posted: June 11, 2006 at 4:53 PM

i have a 2002 supercab f-150. i just got eclipse 6 1/2 components for my front doors. they have a 2 7/8 mounting depth. has anybody put components in a f-150? do you make special adapters or buy some? any suggestions would be great. my last resort is to cut the door hole bigger but i would rather not do that. so any help would be great and pics would help a lot too. thanks

Replies:

Posted By: forbidden
Date Posted: June 11, 2006 at 9:07 PM

Yes, you need to make a mounting adaptor out of 1/4" black abs. You can use mdf if you must, but with the moisture in the door, the mdf will breakdown over time. I'll be making a sticky for this in the future.

-------------
Top Secret, I can tell you but then my wife will kill me.

Posted By: el terror
Date Posted: June 11, 2006 at 9:48 PM

let me ask you is the speaker magnet hiting? or is just that the hole is too small?

Posted By: stormraider04
Date Posted: June 12, 2006 at 1:07 AM

the hole is just to small.

Print Page | Close Window