im new to all of this so go easy on me..... my question is i have a total of 6 mids and tweeters together i bought a phoenix gold ms275 i was wondering if i could run all of those off of that amp... if so will i have to wire them in series and will that keep them at 4 ohms any help is appreciated
well first of all you would want to wire all tweeters together than all mids together. as far as wire them all together you can do it three on each channel. however you would not accomplish much clarity stand point if your just trying to hook them up than ok, but how it will sound ?
-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.
Jon, bad idea there dude. That will change the crossover point on the speakers big time. Do these speakers come with crossovers? What kind and size speakers are they?
-------------
Top Secret, I can tell you but then my wife will kill me.
there all fosgate mids i have a set of 5 1/4 in the doors with a set of tweeters also in the door they came with there own cross over , in the rear deck i have 4 fosgate 6 1/2 mid ranges they didnt come with a cross over so i used a set from my old mb quarts putting one mid on low and the other on mid and i duplicated it for the other to also using another mb quart cross over.... is there another way i can wire these so i can use them all on the ms 275