Print Page | Close Window

box building

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=7905
Printed Date: July 14, 2025 at 9:18 AM


Topic: box building

Posted By: brianh
Subject: box building
Date Posted: January 09, 2003 at 7:12 PM

I have to say my weakness is my box building.  When you build a "wedge type 2 "  enclosuer what type of angles do you use so the everything meets up correctly? I have always built the "easy" rectangle boxes and want to learn how to build this type. Thanks so much.  Brian



Replies:

Posted By: Velocity Motors
Date Posted: January 09, 2003 at 7:23 PM
I build them to vehicle specs. All vehicles have a different seat angle, so each angle for each vehicle will differ. 

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: brianh
Date Posted: January 09, 2003 at 7:52 PM
That makes sense. Dont you have to cut the edge of the top section so it will meet up with the front of the box?  Brian


Print Page | Close Window