Print Page | Close Window

Painting Kicker Amps

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79204
Printed Date: May 15, 2024 at 2:42 PM


Topic: Painting Kicker Amps

Posted By: arcangel9
Subject: Painting Kicker Amps
Date Posted: June 16, 2006 at 2:07 PM

Hey I have a kicker kx600.1 and I was wondering how I would go about painting the EndKaps a custom color.



Replies:

Posted By: djfearny2
Date Posted: June 16, 2006 at 2:12 PM
since they are more than likely plastic use a plastic prep and paint from sem products great stuff made for the application. spray atleast 6 to 8 inches away so that it does not pool up/


-------------
Jon
Installer/Help Technician
---coral springs florida---
mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.



Posted By: arcangel9
Date Posted: June 17, 2006 at 12:26 AM
If they were plastic that would work but these are actually cast aluminum



Posted By: spookiestylez
Date Posted: June 17, 2006 at 12:28 AM

light sand, primer shade depending on if your painting a light or dark color...1-3 coats of color ....wet sand  if necessary...and clear coat



-------------
RTFM




Print Page | Close Window