Print Page | Close Window

how to wire a 4ohm amp

Printed From: the12volt.com
Forum Name: Car Audio
Forum Discription: Car Stereos, Amplifiers, Crossovers, Processors, Speakers, Subwoofers, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=79473
Printed Date: May 13, 2025 at 12:35 AM


Topic: how to wire a 4ohm amp

Posted By: davisjohn1977
Subject: how to wire a 4ohm amp
Date Posted: June 22, 2006 at 4:58 PM

I have a 4 ohm amp and 2 4 ohm speakers . I wont to wire the amp down to a 2 ohm amp. how???



Replies:

Posted By: DYohn
Date Posted: June 22, 2006 at 5:13 PM
What's the amplifier and speakers make/model?

-------------
Support the12volt.com



Posted By: davisjohn1977
Date Posted: June 22, 2006 at 5:17 PM

amp is a pyle    plad-213

and speakers are Visonik        V10D4




Posted By: DYohn
Date Posted: June 22, 2006 at 5:30 PM

Your amplifier requires a total load no less than 4-ohms when bridged.  Your speakers are DVC 4-ohm speakers.  Wire it like this:

posted_image



-------------
Support the12volt.com



Posted By: supradude
Date Posted: June 22, 2006 at 6:09 PM
Be very gentle with the Pyle amp.

-------------
'85 Toy



Posted By: davisjohn1977
Date Posted: June 22, 2006 at 6:31 PM
why do you say that?



Posted By: aznboi3644
Date Posted: June 22, 2006 at 6:50 PM
Cuz pyle amps are crap...sorry...thats just the bottom line. Pushing a pyle may turn it into a pyle of doodie.


Print Page | Close Window